Type 44 Starter Motor mounting bolts

DGraber460 at aol.com DGraber460 at aol.com
Tue Dec 12 22:37:21 EST 2000

I was able to remove it with an adjustable spanner (Crescent in the US), with 
another wrench inserted in the handle end to prevent rotation. The rear nuts 
were barely accessible through the wheel well. If memory serves, I was unable 
to use a ratchet on the nuts. Only small increment turns with the wrench.
The only job I've found to be more difficult, is the 5 cyl. clutch slave 
cylinder removal/install.
That must be a good friend.
Good luck.


More information about the quattro mailing list