Disabling 5kq Headlamp warning

Todd Phenneger tquattroguy at yahoo.com
Sat Jun 23 19:57:37 EDT 2001

Subject says it,
  I'm looking in the archives.  I'll keep looking.  But
basically , when you relay the headlamps on the 5kq the warning
light will come on.  Now if memory serves, to disable it you can
 A) run a jumper wire on the relay for the Auto Check system. 
WHich relay and which terminals do you jumper.  And I believe
this would disable the remaining auto check features for the
lamps.  Also, IF you go this route do you leave the relay in and
jumper terminals or JUST jumper the terminals and remove the

 B) Put a resistor inline with the wire the powers the relay or
something.  But this has to go through to ground so do you have
to then short this to ground through a resistor???  Dont quite
get this one but have heard about it.

Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail

More information about the quattro mailing list