re.high idle after cleaning isv
quattro at isham-research.com
Thu Oct 25 22:08:40 EDT 2001
I meant to say 'solenoid type' - did I forget? I don't keep copies ...
----- Original Message -----
From: "Brett Dikeman" <brett at cloud9.net>
To: "Phil Payne" <quattro at isham-research.com>; <quattro at audifans.com>; "Just
Taylor" <audi at lart.com>
Sent: Thursday, October 25, 2001 8:27 PM
Subject: Re: re.high idle after cleaning isv
> At 7:52 AM +0200 10/25/01, Phil Payne wrote:
> > Blow into the
> >end - if you hear nothing it's making a good seal.
> On 3B's, AANs, and other cars which have the big fat ISV(not the thin
> one on the MC for example), the "blow" test must be done with the
> ignition on, valve connected. Disconnected or off, the valve "rests"
> with the vane moved past the fully closed position to one which
> leaves a small slit open...unless my valve is toast :-)
> "They that give up essential liberty to obtain temporary
> safety deserve neither liberty nor safety." - Ben Franklin
> http://www.users.cloud9.net/~brett/bdikeman.asc (PGP Public Key)
More information about the quattro