5 into 1 merge collectors

JShadzi at aol.com JShadzi at aol.com
Fri May 10 02:58:03 EDT 2002

[ Picked text/plain from multipart/alternative ]
I did extensive research looking for 5-1 merge collectors before I resorted
to building my own, see http://www.80tq.com/tube_header.html

Anyway, the only real option I found was at www.burnsstainless.com , problem
is its not cheap ($275ish), and its is quite large in diameter, and if you
are working on a 10v, space is a big issue.  Mainly, in the 10v application,
there is a lot of width along the intake manifold, but depth towards the
frame rail and fender starts getting tight.  You'll notice with my design,
all the runners merge in one plane, along the back of the IM, fits perfectly,
no clearance problems.

Anyway, let me know if I can help.


In a message dated 5/9/2002 8:39:27 PM Pacific Daylight Time,
dandwyer at hotmail.com writes:

> Hello,
> Does anybody know a source for reasonably priced 5 into 1 merge collectors
> that would be appropriate for a custom Audi header.
> I don't want to fabricate a collector if you can get them off the shelf
> somewhere.
> TIA,
> Dan

More information about the quattro mailing list