'89 90q master cylinder upgrades for BIRA sys1?

Jim Green jeg1976@yahoo.com
Wed, 31 Jul 2002 10:51:02 -0700 (PDT)


--- Mihnea Cotet <mik@info.fundp.ac.be> wrote:
> At 09:43 31/07/2002 -0700, Jim Green wrote:
> >When I do end up installing my BIRA system 1, I'd
> like
> >to upgrade the master cylinder to reduce pedal
> travel.
> >  I know that Javad put a 7A (coupe quattro I
> assume)
> >on his car, and Alex used one from a 200 tq.  My
> >question is, will either of these, or even one from
> a
> >5ktq bolt up to my 90q with ABS?  I really don't
> want
> >to modify any brake lines.
>
> Yep, normally both should work, I also have a 7A
> 90q20v (euro version)
> brake MC on my 3B coupe quattro, still with stock
> calipers though but not
> for so long anymore...
>
> You shouldn't need to modify any brake lines at all,
> even if your car has
> ABS...
>
> HTH,

Great, thanks guys, after looking some more, it looks
like the CQ and 200tq use the same 25 mm. MC. The
5ktq, uses a 23mm so it's probably still to small.

Later,

=====
Jim Green
'89 90tq 034EFI, Haltech IG5
http://www.geocities.com/jeg1976/car_home.html

__________________________________________________
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com