Roll Cage design 87 1/2 coupe GT
Sun, 25 Aug 2002 21:26:24 -0500
Safetydevices.co.uk makes a cage for the URQuattro. I have one waiting to
go on my car still...
> -----Original Message-----
> From: firstname.lastname@example.org [mailto:email@example.com]On
> Behalf Of Kwattro@aol.com
> Sent: Sunday, August 25, 2002 9:00 PM
> To: firstname.lastname@example.org
> Cc: email@example.com
> Subject: Re: Roll Cage design 87 1/2 coupe GT
> In a message dated 02-08-25 16:08:40 EDT, you write:
> << Hi!
> I am looking for a cage design for my Coupe. I have a friend
> who'll do the
> bends and welds.
> The only thing he needs is a design with the dimensions.
> This is the first time I am doing something like this.
> I have looked at bolt-ins/-ons from the usual sources and
> found them to be
> waay overpriced for
> the gain received.
> What type/grade of metal and welding should be used for best results?
> Anyone out there who has built one?
> Any BTDTs would be great!!!
> Thanks fellas!
> Zafir 87 1/2 Coupe GT (se cuup wants too goo reecing)
> I have a half cage in my GT - four point, with cross bars and
> mounting bars
> for seats and belts. The whole package is quite neat. I can
> get dimensions
> for you, if you like, but I believe that you'll find that
> almost everything
> you'll have to do will be custom done to your car...