cis-e help!! [NG CIS-E3]

Huw Powell audi at
Wed Dec 31 22:53:17 EST 2003

> So my correct course of action would be to check the temp sender to be 
> sure(yes i have a bentley+Jan Pinkowish sent me the spec and chapter)

Yes, exactly.

> and then move on to the injectors, fuel pump &check valve etc... since i 
> get no real pressure at the lines (No quick release, maybe a drip or 
> two), except the csv line.

If you want a better idea of what your injectors are doing, and do this 
carefully, well vented, no sparks, etc., pull the injectors out of the 
head/manifold and stick them in jars, set up a way to jump the fuel pump 
relay (so the pump runs), and with it running, raise the air plate by 
hand.  The injectors should start to spray then, and youwill see their 
relative flow rates (by how much is in each jar) and spray patterns.

Kind of like the picture 3/4 of the way down this file:

Good luck, and have fun!

Huw Powell

More information about the quattro mailing list