a very rough Audi weekend

Fred Munro munrof at sympatico.ca
Tue Jul 22 22:22:57 EDT 2003

It does happen on the UrS4 - S6, Marc. The timing belt cover fits very
tightly, but if you blow a serpentine belt, the fragments can end up inside
the timing belt cover and under the belt. I had a serpentine belt split in
half and shred, lots of chunks ended up inside the timing belt cover.
Fortunately, none got under the t-belt.

Fred Munro
'94 S4

-----Original Message-----
From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
Behalf Of Marc Swanson
Sent: July 22, 2003 3:43 PM
To: C1J1Miller at aol.com
Cc: quattro at audifans.com
Subject: Re: a very rough Audi weekend

> Cover was in place, both top and bottom...  Power steering belt was
replaced at Lime Rock a month earlier; same belt failed again (a Gates
> Belt shredded, and a thin end looks like it must have hit the crank pulley
right at the belt cover, and it got twisted around and pulled in.

bet he couldn't do that again if he repeated the procedure a dozen times
(not that you'd want to!).  Sounds like a _SERIOUS_ stroke of bad luck!

87' 4ktq
88' 90q

More information about the quattro mailing list