Radiator choices,modified Modine, Nissens or AKG?
paulnet at direcway.com
Wed Jul 23 13:03:34 EDT 2003
Thanks everyone for your reviews. I have now kind of an idea of the trouble
spots and am not discouraged yet. I think I may be able to resolve this
before I install it in the car. I am glad I asked and didn't find out when I
have the rad in place and have to make a run to the list with big panic
I am going to order it now, and will let you know of my experience.
----- Original Message -----
From: "DAK" <dak at rochester.rr.com>
To: "Kneale Brownson" <knotnook at traverse.com>
Cc: "Martin Pot" <paulnet at direcway.com>; <quattro at audifans.com>;
<200q20v at audifans.com>
Sent: Wednesday, July 23, 2003 11:04 AM
Subject: Re: Radiator choices,modified Modine, Nissens or AKG?
> IMHO, it was either bad threads on the insert or distortion caused by
> the welding process.
> > The problem with the "tight" threads in the Nissens as reported here was
> > that the captive nuts or whatever in the radiator would break loose so
> > you couldn't tighten the radiator into position properly. It wasn't
> > case of too much paint in the threads. It was more like poor assembly.
> > _______________________________________________
> > 200q20v mailing list
> > 200q20v at audifans.com
> > http://www.audifans.com/mailman/listinfo/200q20v
More information about the quattro