Mon, 26 May 2003 23:19:04 -0400
> -----Original Message-----
> From: firstname.lastname@example.org [mailto:email@example.com]On
> Behalf Of JShadzi@aol.com
> [ Picked text/plain from multipart/alternative ]
> Nope, no way to do it IME, just pull the steering column, not
> too bad, once
> its out you can easily chage the switch. Problem is the
> switch is held in by 2
> very small screws that thread in from the top, no easy acess to them.
> If anyone's found another way that woudl be nice, takes a
> couple hours to do
> it the above way though.
Why not remove the T30 safety torx holding the whole electrical and
mechanical section of the ignition and pull it out that way? You've got to
pull the cluster and combiswitches, but that's about it. 20mins.
'81 Vw Pickup
'93 E350 Club
> In a message dated 5/26/2003 3:59:41 PM Pacific Standard Time,
> firstname.lastname@example.org writes:
> > Anyone know how to change the ignition switch in a 1990 80
> Quattro without
> > taking out the whole dash / steering column?