80 FWD Rear End on '84 CGT?

Ben Swann benswann at comcast.net
Mon Aug 7 16:05:31 EDT 2006

It just bolts in.  You van do the whole swap by dropping the arm with
calipers, etc.  


You'll need to swap out struts in the front too, or use from later CGT.  The
carriers for the brakes are different size and AFAIK won't allow the calipers
to interchange. 


Change springs and struts back to match the car.


I did this swap on this '83' CGT and installed turbo engine:





[Date: Mon, 7 Aug 2006 16:20:05 GMT

From: "mwvogt at netzero.com" <mwvogt at netzero.com>

Subject: 80 FWD Rear End on '84 CGT?

To: quattro at audifans.com

Message-ID: <20060807.092105.10883.621214 at webmail28.lax.untd.com>

Content-Type: text/plain


Looked in the FA and archives and don't seem to find much on rear end upgrades
for early '84 CGT. I am looking to upgrade my rear end brakes to disk and
4x108 hubs. Any info or BTDT would be of great help. Also conversion of front
4x100 to 4x108 would go along with upgrade.


Mark Vogt]

More information about the quattro mailing list