Need PN for sensor 88-89 80q
t.tiholov at gmail.com
Mon Feb 6 18:47:26 EST 2006
>> Date: Mon, 6 Feb 2006 07:07:03 -0800 (PST)
From: Matthew Kramer <stpndsmn at yahoo.com>
Subject: Need PN for sensor 88-89 80q <snip>
I am looking for the part number for the oil psi gauge sender on an 88-89
80q. I am putting the gauges into my ktq project and I have no idea what
the sensor # is...
> As Marques explains, the 035 919 561 can shaped sender fits in the upper
hole the houses the LP oil sender.
> You can also use 035 919 561A can shaped sender. This goes in the lower
hole that houses the HP oil sender.
> You can buy these new, but one sender is 4-5X the price of the other.
There's actually 5 different options for oil press. senders for NG motor:
- 3 are switches - 2 low press. (0.25 and 0.3 bar), 1 medium (1.8 bar);
- 2 are senders for the gauge (0-5 bar).
The 3 switches are single wire, the 2 senders are 2-wire.
Each car takes 1 of the first 3 and 1 of the second 2, depending on what was
in there form the factory. Both 035 919 561 and 035 9191 561A are 2-wire,
so a car uses 1 one of those plus one of the 3 single wire:
028 919 081 D (0.15-0.3 bar blue/black,
056 919 981 CZ (0.3 bar) braown/black or
056 919 081 E (1.8 bar) white or black
More information about the quattro