89 200QTA rear rotor question

Nick Lawrence nick at beol.net
Tue Feb 21 10:45:39 EST 2006

I have done this to my '90 200 tqa.  It involves more than just rotors.  It 
is well written on sjm's site.
I used parts from a 20v car.  Backing plate, calipers and rotors.  Easy to 
----- Original Message ----- 
From: "tmb" <the_questionist at yahoo.com>
To: "audifans" <quattro at audifans.com>
Sent: Tuesday, February 21, 2006 10:32 AM
Subject: 89 200QTA rear rotor question

> hey again.  i've got a few spare minutes today,
> so i'll be inundating the list with a load of
> questions...
> my 89 200QTA needs some rear brakes.  according
> to ETKA, the 20V and wagon variations need
> 269x20mm rotors vs the 245x10mm rotors used by
> the MC sedan.  bigger brakes are always better,
> but not if the only source is the dealership.
> are there any aftermarket suppliers for this size
> rotor, or are there any options for me?  keep in
> mind that any US aftermarket companies will
> probably not do me much good, as the savings that
> i'll see will quickly be eaten up by
> shipping/border charges.
> thanks in advance!
> jason
> tmb
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro 

More information about the quattro mailing list