type 44 prop shaft u-joint part #

Peter Golledge petergolledge at gmail.com
Thu Jun 8 00:09:00 EDT 2006


I used a NEAPCO 1-0013 U-joint from Pep Boys.  Required 4 x 1" fender
washers as shims, had to drill the 
center of one out so that I could mount the grease nipple.  Still working
some 50K miles and many years later. :-)  Make sure you get replacement
circlips also.

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of Bogach, Konstantin (IT)
Sent: Wednesday, June 07, 2006 9:23 PM
To: quattro at audifans.com
Subject: type 44 prop shaft u-joint part #

Can someone remind me what replacement u-joint is easy to find?  I need it
tomorrow.  I remember I bought it from Napa 3 year ago but I can not find
part # and manufacture.  It required shims but was cheap and available.

NOTICE: If received in error, please destroy and notify sender.  Sender does
not waive confidentiality or privilege, and use is prohibited.
quattro mailing list
quattro at audifans.com
Watch this space for ads :)

More information about the quattro mailing list