95 A6q Power Window Dilemma

Mark R speedracer.mark at gmail.com
Mon Nov 17 11:30:36 PST 2008


Withholding information?  Geesh.  Grant still get's +1.   =)

I'd make certain the controller is dryed out, check wiring.  A good
no-residure circuit board cleaner is the trick (assuming you can get into
the controller housing).  Caig's cleaner is great for wiring.  If it looks
reasonable, plug and unplug the suspect harness 5 or 6 times after
cleaning.  Next step would be to test for voltage (and amperage) to the
controller after you have a failure.

Mark Rosenkrantz

On Mon, Nov 17, 2008 at 10:54 AM, <TooManyAudis at aol.com> wrote:

> In a message dated 11/17/2008 8:49:17 A.M. Eastern Standard Time,
> glenahan at vfemail.net writes:
> ignition  switch.
> guaranteed
> $20 part, and 1-2 hours of labor if you've never done  it
> Grant
> Well, the ignition switch certainly crossed my mind, as well.  it was
> replaced just a month or two ago, and there seems to be improvement now
> that I  have
> let the area with the window control unit dry out.
> I'll test again tonight and see if there is further progress.
> -- Tom
> **************Get the Moviefone Toolbar. Showtimes, theaters, movie news &
> more!(
> http://pr.atwola.com/promoclk/100000075x1212774565x1200812037/aol?redir=htt
> p://toolbar.aol.com/moviefone/download.html?ncid=emlcntusdown00000001)
>  _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)

More information about the quattro mailing list