Competent Audi Tech, Southern Tier of New York
speedracer.mark at gmail.com
Tue Jun 16 18:49:01 PDT 2009
Other than me? Autofirme is good and somewhere downstate.
On Tue, Jun 16, 2009 at 7:58 PM, LL - NY <larrycleung at gmail.com> wrote:
> Not for me. I have to do a clutch on the UrS though, but since that too
> really needs a lift, I'm thinking of letting someone else do it. Come to
> think of it, I'd do the Timing Belt on her though. Anyway, know of a decent
> shop to do the clutch? My guy downstate is NLIB.
> On Tue, Jun 16, 2009 at 7:20 PM, Mark Rosenkrantz <
> speedracer.mark at gmail.com> wrote:
>> I'd do it, but it's SO much easier with a lift... and my Rotary is not up
>> until I build a new garage (hopefully this fall). I.E. even if I don't
>> charge as much per hour, I might be more expensive in the long run.
>> It might be a lot of labor.... especially to drill out/extract the frozen
>> fasteners. Generally they'll shear with air tools, allowing the tank to
>> drop, which frees up the access.
>> Anyhow, you've been to my house, in Port Crane, NY.
>> Anything less PITA he needs done? ;-)
>> Mark Rosenkrantz
>> On Tue, Jun 16, 2009 at 4:19 PM, LL - NY <larrycleung at gmail.com> wrote:
>>> Trying to help out a friend.
>>> I have a friend with a C4 100Q Avant that's in need of a new fuel tank.
>>> Friend has a replacement tank from Semple. Neither he, nor I have the
>>> nor facilities to put in the replacement tank, so he's searching for a
>>> decent tech to do the job. First guy on the job had to struggle with the
>>> rusted bolts and backed out of the job when he couldn't get any to budge.
>>> specification as to which bolts are rusted, but assuming that the axle
>>> to come out first, I'd venture a guess it's to do with axle/diff.
>>> Anyone know of a decent, reasonable tech between Monticello, NY and
>>> Binghamton, NY along the Rt 17 corridor?
>>> LL - NY
>>> quattro mailing list
More information about the quattro