New Seats - need help with wiring 5k to 200

[John Cody Forbes]

DeWitt Harrison wrote:
> So I would do the same in your case. Salvage the seat harnesses from
> a 5k
> and splice them into your 200 seat harnesses. If you would like, I
> can go through my 5000CS and 200 factory manuals to come up with a
> wiring list. One thing
> to keep in mind is that some of the seat wiring harness wires are
> electrically hot even while the car is not running. Short story: pull
> the battery ground connection when fooling around with the seat
> connectors.

If you decide to go this route let me know. I've got all of the wiring 
already removed from the 5ktq race car I'm building. I removed them with the 
intent of saving - I didn't cut any wires except a few ~10awg that were 
semi-permanently fastened to the fuse panel.

-Cody Forbes