[WT-Audifans] RE: Brake Pad Wear Warning Light
mhoepli at vif.com
Tue Oct 25 08:24:13 PDT 2011
Did connect left and right side wires together. Brake pad wear warning light
is still illuminating. I'm going to continue working on the issue and will
get back to the groups.
From: Tony Hoffman [mailto:auditony at gmail.com]
Sent: Tuesday, October 25, 2011 10:57
To: Max Hoepli
Cc: blur at cogeco.ca; w-t_audifans at yahoogroups.com;
audi_owners_usa at yahoogroups.com; quattro at audifans.com
Subject: Re: [WT-Audifans] RE: Brake Pad Wear Warning Light
So, did you connect them together, that is, each pair of wires? If so, the
problem lies upstream of that as I mentioned yesterday. If not, you need to
connect them together, as they see any open circuit (cut wires) as worn out
brake pads and a short as a new set of pads.
On Tue, Oct 25, 2011 at 9:46 AM, Max Hoepli <mhoepli at vif.com> wrote:
I know the whitish symbol with the "X over the light bulb with the socket
end up" displays certain light bulb(s) not illuminating. This light has
illuminated before. I changed out a bulb and cured the problem.
The whitish brake drum symbol is illuminating which according to the Audi
manual indicates worn front brake pads, only in my car's case the sensor
wires have been disconnected.
More information about the quattro