[s-cars] Re: IR Remote Programming
wenoland at pacbell.net
Thu Dec 18 08:34:13 EST 2003
Had these instructions saved from a post somewhere in the distant past
-- (list)author unknown. (Note -- turn the key in the ignition on, but
do not start the car):
The procedure is simple. You put your second key in the ignition and turn
it on. Then you exit the car, lock the doors with the primary key, and then
depress the button while pointing at the IR receiver. Press once if it is
to be keyed to the number 1 slot on the seat memory module. Press twice if
it is to be keyed to the number 2 slot on the seat memory module.
The alarm will beep each time you depress the key. Then wait 5 seconds and
depress it again and the doors will unlock.
Repeat the procedure after swapping keys to program the other key(s)
>From then on, if the key ever gets confused, simply unlock your door
manually with the key and then depress the button while pointing it at the
IR receiver to resynch the key to the car.
>Searched the Archives with no luck, can someone give me the instructions for
>programming a new infared remote? Also, isn't there is a way to program keys
>1 and 2, to correspond to seat and mirror positions...
More information about the S-CAR-List