[s-cars] Removing Transmission: Do I remove driveshafts at the transmissi...

Djdawson2 at aol.com Djdawson2 at aol.com
Mon Nov 17 19:41:28 EST 2003

[ Picked text/plain from multipart/alternative ]
In a message dated 11/17/03 1:24:02 PM Mountain Standard Time,
Paul.Park at Colorado.EDU writes:

> Anyways, when removing the transmission, do I have to remove the
> driveshafts from the transmission, or where do I disconnect the drive
> shafts at...the wheel side, or the transmission side?

Remove the half shafts completely.... the large nut on the hub, and 6 triple
square bolts at the trans output flange.  You will have to turn the wheels to
full lock to have the clearance needed to remove the shafts once the bolts are
removed.  You may want to remove your ABS sensors prior to removing the axles
to avoid possible damage.
Have fun!
PS: If you don't own triple square drivers, you can get them locally at "Tool

More information about the S-CAR-List mailing list