[s-cars] Wind noise from drivers door
Bjørn Eirik Ødegård
beernuts at online.no
Thu Nov 27 17:39:27 EST 2003
What if I want to realign the whole door? My door is tilted inwards on the bottom, and it squeeces the bottom trim and makes the trailing edge of the lower rear door sandblasted..
is a shim under the lower hinge the only solution??
The door would fit perfectly if tilted about 1degree with the clock..
'92 S4 MTM
----- Original Message -----
From: Gabriel Caldwell <gabriel at ts.bc.ca>
To: <HOOG23 at aol.com>; <robert at s-cars.org>; <s-car-list at audifans.com>
Sent: 27. november 2003 22:20
Subject: RE: [s-cars] Wind noise from drivers door
Pretty easy. One screw at each side of the top of the panel, and two
hidden underneath the door pull. You have to pry off a bit of the door
pull to reveal the screw. Examine it closely and you will see what
needs to come out. Once all the crews are removed, pull up on the
Tsunami Solutions Ltd.
#202 - 2055 Boundary Road
Vancouver, BC Canada V5M 3Z1
e-mail: gabriel at ts.bc.ca
From: HOOG23 at aol.com [mailto:HOOG23 at aol.com]
Sent: November 27, 2003 1:00 PM
To: Gabriel Caldwell; robert at s-cars.org; s-car-list at audifans.com
Subject: Re: [s-cars] Wind noise from drivers door
Yes, this sounds like a 'safer' method.
Any of the urs faq's cover removal of the door panel?
'95 S6 (Red)
S-CAR-List mailing list
S-CAR-List at audifans.com
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.545 / Virus Database: 339 - Release Date: 27.11.2003
More information about the S-CAR-List