[s-cars] Refilling Coolant
quattro20v at telus.net
Thu Jul 15 12:11:20 EDT 2004
There is no need to bleed it, I just filled up the reservoir, ran the
car until it heats up and continue adding until the level in the
reservoir stabilizes at the full mark and the engine is hot.
I would do this outside, not in your garage, because all the new bits
will emit copious stinky smoke when it heats up. Its all the penetrating
oil and paint (if you painted or coated the EM) burning off.
1997 Audi S6//RS2-spec
1990 Audi 90 quattro 20v
> -----Original Message-----
> From: s-car-list-bounces+quattro20v=telus.net at audifans.com
> [mailto:s-car-list-bounces+quattro20v=telus.net at audifans.com]
> On Behalf Of Brian Powell
> Sent: Thursday, July 15, 2004 8:29 AM
> To: s-car-list at audifans.com
> Subject: [s-cars] Refilling Coolant
> I am finishing up with the RS2 goodies install on my car and will be
> refilling the coolant. On my other two Audis, there is a
> bleeder valve
> you open near the firewall to the heater core and fill until it comes
> out of the bleeder. Close it all up, run for 10-15 minutes, top off,
> and you're all done.
> I don't see a bleeder valve anywhere on the 97 S6. What is the best
> way to refill the system? I drained it completely replacing the
> thermostat, turbo, etc. The car being a 97 has always used the pink
> (G12 I think) coolant of love.
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-> car-list
More information about the S-CAR-List