[s-cars] unstable idle problem solved

Mark Strangways Strangconst at rogers.com
Fri May 6 18:05:37 EDT 2005

Maf has lots to do with closed loop driving. While I would like to be WOT 
all the time, I am afraid that my DL would last about 1 day... :-)

What needs to be done is get Mihnea to re-write the code so it follows the 
MAP (speed density) then we could get rid of the MAF.

----- Original Message ----- 
From: "Robert Myers" <Bob at chips-ur-s.com>
To: "Trevor Frank" <tfrank at symyx.com>; <Elijahallen92 at aol.com>; 
<es2 at audifans.com>; <s-car-list at audifans.com>
Sent: Friday, May 06, 2005 5:26 PM
Subject: RE: [s-cars] unstable idle problem solved

> At 05:20 PM 5/6/2005, Trevor Frank wrote:
>>Go to stand alone or...you can do what I did...about $600 total with a
>>4.5"inlet and 4"outlet, I will give you the voltage offset's you need so
>>that your software doesn't even know you changed the maf.
> Now the next question: why do it if it makes no difference to the 
> software?  It's the software that controls fuel flow and timing, not the 
> MAF.
> Bob
> Http://Chips-Ur-S.com
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list

More information about the S-CAR-List mailing list