[s-cars] Tighten up Front End

James Murray (QA/EMC) james.murray at ericsson.com
Mon May 9 16:54:30 EDT 2005

The ones from germanautoparts control arm comes with the all bushings needed...no need to order seperate ones, just ask when you call (it's part of the kit), not sure why they list them seperate as it confuses you... 



-----Original Message-----
From: s-car-list-bounces+james.murray=ericsson.com at audifans.com
[mailto:s-car-list-bounces+james.murray=ericsson.com at audifans.com]
Sent: Monday, May 09, 2005 2:51 PM
To: Gabriel Caldwell
Cc: s-car-list at audifans.com
Subject: Re: [s-cars] Tighten up Front End

I thought the control arm came with bushings?


Based on what you say, I will need none of first part in list, and 4
of second part but I don't need any of part #3 which is for the rear
suspension, correct??


Strut mounts, thanks....

Not using Bilsteins, so won't need bump stops, correct??


On 5/9/05, Gabriel Caldwell <gabriel at ts.bc.ca> wrote:
> You'll need what are called the outer control arm bushings.  These are
> where the control arm connects to the sway bar.  4 are required.  You
> could also replace the sway bar bushings if you wanted to.  Strut mounts
> while you are replacing the front strut inserts.  Bump stumps too
> depending on if you are using Bilsteins or not.
S-CAR-List mailing list
S-CAR-List at audifans.com

More information about the S-CAR-List mailing list