[s-cars] have a cracked OZ SL,
billzcat1 at hotmail.com
Mon May 16 22:45:46 EDT 2005
.. I make custom hubcentric wheel spacers :) 3mm, 5x112 is no problem!
who just got stiffed by a nissan guy for a set of 15mm spacers
----- Original Message -----
From: "Keith Maddock" <keith.maddock at gmail.com>
To: <Elijahallen92 at aol.com>
Cc: <sola4est at yahoo.com>; <s-car-list at audifans.com>
Sent: Monday, May 16, 2005 7:42 PM
Subject: Re: [s-cars] have a cracked OZ SL,
Err, After re-reading, I'll stick with my original statement. The 2nd
time around I thought you had 3 ET35's and an ET32, which was not
right ! Fott out of mouth (or in further, depending on your
perspective... if I keep this up I could run for president)
Take your ET35, add a 3mm spacer, and it will be the same as your E32's.
If you can't find a 3mm spacer, get a 5mm or 10mm spacer, and take it
to a machineshop.....
On 5/15/05, Keith Maddock <keith.maddock at gmail.com> wrote:
> Oops, I concur. Foot in mouth!...
> Adding a 3mm spacer to a ET32 wheel will make it a ET29 wheel.
> Now, what you REALLY need to do is find a -3mm spacer ;-)
> That would also compliment an array of CF trim glue-on peices to
> reduce weight on the car....
> On 5/15/05, Elijahallen92 at aol.com <Elijahallen92 at aol.com> wrote:
> > I think your right. Forrest, now you need three spacers to match the one
> > wheel.
> > In a message dated 5/15/2005 7:16:00 PM Eastern Standard Time,
> > larrycleung at gmail.com writes:
> > Forrest, et. al.;
> > I thought that ET32 already sits further out from the car's centerline
> > than ET35.
> > Spacer's won't fix the problem, if that is the case.
> > Correct me if I'm wrong.
> > LL - NY
> > On 5/15/05, Keith Maddock <keith.maddock at gmail.com> wrote:
> > > On 5/15/05, forrest bradshaw <sola4est at yahoo.com> wrote:
> > > > my wheels are et32, I found a replacement wheel that is et35, can I
> > > > add
> > a 3mm spacer to the et35 to make it the same as the et32s on my car or
> > would
> > it be differant?
> > >
> > > Nope, that should work. Does anyone sell 3mm spacers though?
> > >
> > > > or a rim shop says they can weld the crack for 55 and then
> > > > restraighten
> > it for 70, the crack is fairly small and its on the inner lip inside the
> > rim, no air leaks out of the tire its not that bad. should I just have
> > the
> > wheel fixed?
> > >
> > > I'd go for the spacer now... keep the "cracked" wheel in the garage in
> > > case you trash another wheel sometime and can't find a further
> > > replacement - the "cracked" wheel might be cheaper to repair than the
> > > other broken wheel at that time....
> > >
> > > Cheers,
> > > Keith
> > > _______________________________________________
> > > S-CAR-List mailing list
> > > S-CAR-List at audifans.com
> > > http://www.audifans.com/mailman/listinfo/s-car-list
> > >
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list
> PGP Key: http://keith.maddock.com/pgpkey.html
PGP Key: http://keith.maddock.com/pgpkey.html
S-CAR-List mailing list
S-CAR-List at audifans.com
More information about the S-CAR-List