[s-cars] Bosch 13913 plug

Igor Kessel KBATPO at comcast.net
Thu Aug 3 09:20:56 EDT 2006

Douglas Fifield wrote:
> Igor,
> I have my 13913 sensor and my mating socket with the wires as you
> describe. You talk of rearranging wires in the socket to match the
> wire set-up in the sensor plug.
> Two questions:
> 1 How did you rearrange the wires in the socket, and

I used a curved dental pick to pry out the red Si insert in the back of 
the socket. After doing so you'll be able to see which wires are 
soldered to which pins.
There is a little purple insert on the face of the socket. It serves as 
a lock for the pins with wires. If you pry it out you'll unlock the pins 
and will be able to rearrange them.

> 2 How can you tell which pins on the sensor plug are attached to the
> white wires?
> On my generic sensor, the wires are covered in insulation up to the plug.

If you look at the pins form the plug side so that they form a triangle 
with equal sides, like a roof of the house, the top one will be BLK and 
the sides will be WHT. If you wish you can send me a pic of the plug 
facing me and I will show you which pins relate to which wires.

> D.
> On 7/13/06, Igor Kessel <KBATPO at comcast.net> wrote:
>> Jerry Scott wrote:
>> > Bill
>> > This appears to be a harness and not just the connector.
>> > Jerry
>> >
>> > Bill Mahoney wrote:
>> >
>> >> Folk's
>> >> I think this may the correct part no. for the three wire  95-7395-cp
>> >> available here:
>> >> 
>> http://pointe-products.com/Items.asp?query=yes&Search=95-7395-cp&x=36&y=13 
>> >>
>> >> Dunno for sure it's correct though.
>> >> This is a great Igor find since we been lookin for these seemingly 
>> forever.
>> >> How nice will it be to just plug n play O2 sensors huh?
>> >> Thanks Igor!
>> >> Bill~O2~M
>> Yet, it looks like the one I have. It comes with 4 wires about 15 cm
>> long (RED, YEL, BLK, BLK/WHT). I used 3 of those which I rearranged
>> inside the plug, so that the YEL and RED are now the heater circuit and
>> mate to the two OEM WHT ones. The BLK one mates with the OEM BLK one for
>> the signal. I left BLK/WHT unused but did not pull it out from the
>> connector because I wanted it to remain waterproof.
>> -- 
>> Igor Kessel
>> two turbo quattros
>> _______________________________________________
>> S-CAR-List mailing list
>> S-CAR-List at audifans.com
>> http://www.audifans.com/mailman/listinfo/s-car-list

Igor Kessel
two turbo quattros

More information about the S-CAR-List mailing list