[s-cars] Help with the Evil T shaped coolant connector

Robert Rossato r0ssat0_987 at att.net
Sun Jun 11 07:27:37 EDT 2006

That is correct.  The clip goes around the outside of the fitting, in
line with the pipe.  

Manny - If you look at the next to last photo from your link you'll
notice that the problem isn't the height of your stack-up, but rather
that the ends of the clip are hitting the inside of the opening for the
sensor and can't spread wide enough to go around the sensor.  Turn the
clip 90deg.

Hopefully you've already realized this.


> -----Original Message-----
> From: s-car-list-bounces at audifans.com 
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of 
> hahnmgh at peoplepc.com
> Sent: Saturday, June 10, 2006 11:55 PM
> To: s-car-list at audifans.com
> Subject: Re: [s-cars] Help with the Evil T shaped coolant connector
>  I got it now. The new black plastic clip slips around the 
> piping from the
> outside just like the old green metal clip. For the guy that 
> was having
> problems, yes as was suggested, turn the T-pipe 90' and slip 
> the clip in from
> around the outside so the parts that curve inward fit in the 
> two slits and keep
> the sensor from popping out. MGH

More information about the S-CAR-List mailing list