[s-cars] STILL no heat!!!!

elijahallen92 at aol.com elijahallen92 at aol.com
Sat Mar 4 20:41:31 EST 2006

I checked all the linkage and made sure the new motor was working properly before I put everything back together. I haven't checked the diagnostics of the heater control unit. How is this done? 

-----Original Message-----
From: Rich Assarabowski <konecc at snet.net>
To: elijahallen92 at aol.com; s-car-list at audifans.com
Sent: Sat, 4 Mar 2006 19:08:50 -0500
Subject: RE: [s-cars] STILL no heat!!!!


At the risk of stating the obvious, after you installed the new flap motors,
did you make sure they operated correctly?  All the linkages installed OK?
Could you see them move from one end to the other as you changed the heater
settings?  As you know the temperature one is under the hood and is
relatively easy to get at, your linkage may be slipping or binding, worth
looking at again.  The footwell/defrost ones are buried under the dash and
are a major PITA.

Any fault codes being thrown?  Have you checked all the diagnostics that are
available on the heater control unit?

-- Rich 

>Engine temp is normal. Yea, with the fan on the lowest setting but with the
heat on I get a little heat and if I turn the >temp down I get cold. As soon
as I raise the fan speed I just get cold air. 

More information about the S-CAR-List mailing list