[s-cars] How to remove turbo?
s_douglas at telus.net
Thu Oct 4 21:19:22 PDT 2007
The hot side to the downpipe requires a 15 mm moon wrench that is bent even
farther. Use a MAP torch and bend it to about 75 degrees. See picture.
I don't remember any special tricks for the nuts holding the turbo to
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Trevor rice
> Sent: October 4, 2007 11:33 AM
> To: s-car-list at audifans.com
> Subject: [s-cars] How to remove turbo?
> Trying to remove turbo without removing exhaust manifold,
> wastegate or downpipes. Have gotten three of four hot side
> inlet to manifold bolts off & three of four hot side exhaust
> side bolts off.
> The remaining two bolts are being a PITA. Anyone got any hot
> tips on removal procedures?
> Hot side inlet to manifold is top left bolt, its a 15mm bolt
> but a regular spanner nor socket can fit in their. Have
> tried a slimmed down open end wrench but its getting hung up.
> Hot side exhaust to downpipe is bottom right bolt 14mm, seems
> theirs a recess in the downpipe to facilitate a socket but i
> haven't had success getting a socket & knuckle into the small space.
> If & when I get theses suckers off I'll keep you all posted
> on how to strip & rebuild a k24 turbo. Might even throw on
> some k26 parts just for fun.
> Windows Live Hotmail and Microsoft Office Outlook together
> at last. Get it now.
> S-CAR-List mailing list
> S-CAR-List at audifans.com
More information about the S-CAR-List