[s-cars] Wheel Bearing tool?
93urs4 at rovershack.com
Thu May 8 18:47:55 PDT 2008
The inside dimension is smaller on one side of the bearing.
On 5/8/08 4:27 PM, "Jerry Scott" <jerryscott at wispertel.net> wrote:
> Are you saying that the bearing has a specific direction of rotation? If
> so, is marked on the bearing?
> ----- Original Message -----
> From: "James Shackelford" <93urs4 at rovershack.com>
> To: "Aaron Ryba" <aaronryba at yahoo.com>; "S-Cars" <s-car-list at audifans.com>
> Sent: Thursday, May 08, 2008 3:56 PM
> Subject: Re: [s-cars] Wheel Bearing tool?
>> YES, the bearings are directional.... Don't ask me how I know.
>> On 5/8/08 3:31 PM, "Aaron Ryba" <aaronryba at yahoo.com> wrote:
>>> IIRC my local machine shop charged me about $40 a corner to remove the
>>> bearings and press in the new ones. I believe the bearings are
>>> directional so
>>> review that in Bentley and have a talk with your machine shop person. Not
>>> if that is a typical issue.
>>> I tried to have the rear bushings replaced at the same time when the hubs
>>> where out but the shop guy couldn't get the correct angle and they looked
>>> they were still in good shape (southern car) so I left them in. I have
>>> (2) if you are interested.
>>> Aaron Ryba
>>> Message: 8
>>> Date: Thu, 08 May 2008 13:40:19 -0400
>>> From: Dave Kase <davekase at pdqlocks.com>
>>> Subject: [s-cars] Wheel Bearing tool?
>>> To: S-Cars <s-car-list at audifans.com>
>>> Message-ID: <48233B03.2000902 at pdqlocks.com>
>>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>> So the Audi tool is $400+
>>> Are there any alternatives? I am not into making one unless it is drawn
>>> up already.
>>> Or should I just suck it up and take it to the shop? What's the going
>>> rate to R&R a wheel bearing?
>>> Dave Kase
>>> Be a better friend, newshound, and
>>> know-it-all with Yahoo! Mobile. Try it now.
>>> S-CAR-List mailing list
>>> S-CAR-List at audifans.com
>> S-CAR-List mailing list
>> S-CAR-List at audifans.com
More information about the S-CAR-List