[s-cars] Hose Rip
mikellardizabal at yahoo.com
Wed Feb 4 07:53:03 PST 2009
Not a FLAP solve, but from Home Depot Motorsports:
- piece of nylon screen mesh cut to fit over ze hole.
-5 min epoxy der mesh on
-then coat the mesh patch w/ that black rubberized goop they sell in a tube for screw driver handles that need to be coated. They sell it in the electrical connectors + wiring aisle at HD.
--- On Wed, 2/4/09, chris chambers <fastscirocco_2000 at yahoo.com> wrote:
> From: chris chambers <fastscirocco_2000 at yahoo.com>
> Subject: Re: [s-cars] Hose Rip
> To: "Audi S Car List" <s-car-list at audifans.com>, "bill mahoney" <airbil at gmail.com>
> Date: Wednesday, February 4, 2009, 10:43 AM
> I couldn't find anything that would work good enough
> when mine
> failed in the middle of amishvilla PA.
> here is a link to my Audiworld post on how I temporarily
> my hose using a rubber plumbing coupler, a pice of pipe and
> a couple
> It worked quite well
> --- On Wed, 2/4/09, bill mahoney <airbil at gmail.com>
> > From: bill mahoney <airbil at gmail.com>
> > Subject: [s-cars] Hose Rip
> > To: "Audi S Car List"
> <s-car-list at audifans.com>
> > Date: Wednesday, February 4, 2009, 10:33 AM
> > Folk's
> > I have about a 1-2" tear in my maf to turbo hose
> > the turbo connection.
> > Pending arrival of der new hose, is there some very
> > resistant tape of
> > silicon adhesive that I might find at the FLAP that I
> > use to nurse
> > this for a coupla days?
> > Should be easy, but I haven't been able to think
> > anything.
> > TIA!
> > Bill~sucking air~M
> > _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> > http://www.audifans.com/mailman/listinfo/s-car-list
> S-CAR-List mailing list
> S-CAR-List at audifans.com
More information about the S-CAR-List