[s-cars] Brake sensor malfunction
fastscirocco_2000 at yahoo.com
Mon Feb 16 15:12:09 PST 2009
My first choice is to fix it so it works as designed, but after that
I think I would go that route.
Do you know if the harness can be easily swapped with one from a parts car or is it part of a bigger harness?
--- On Mon, 2/16/09, Robert Myers <bob at chips-ur-s.com> wrote:
> From: Robert Myers <bob at chips-ur-s.com>
> Subject: Re: [s-cars] Brake sensor malfunction
> To: fastscirocco_2000 at yahoo.com
> Cc: "Scar" <s-car-list at audifans.com>
> Date: Monday, February 16, 2009, 5:49 PM
> I "fixed" mine by entering the instrument cluster
> and jumpering two
> wires inside one of the electrical connectors where it
> attaches to
> the IC. If you want specifics I'll hafta go back
> inside and tell you
> which wires and which connector are involved. Of course
> such a fix
> requires that the driver assume responsibility for checking
> brakes every now and then.
> At 05:18 PM 2/16/2009, chris chambers wrote:
> >My brake sensor on my S6 is screaming that I need new
> brakes, even though
> >there are all new rotors/pads all the way around!
> >The connector on the car side has been cleaned by my
> tech and even
> >when bridging the connectors at the car it still
> screams for pads.
> >Other than cutting back into the harness and permanetly
> >the sensor is there a known trouble area I can check?
> >S-CAR-List mailing list
> >S-CAR-List at audifans.com
> >No virus found in this incoming message.
> >Checked by AVG - www.avg.com
> >Version: 8.0.237 / Virus Database: 270.10.25/1955 -
> Release Date:
> >02/16/09 06:55:00
More information about the S-CAR-List