[s-cars] going big

Tony Curran tony.curran at sympatico.ca
Tue Feb 24 17:45:36 PST 2009

Does anyone know if the 314x30 and 323x30 are the same offset?


96 S6

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of
Michele_Deltergo at KeyBank.com
Sent: February 24, 2009 7:34 PM
To: Robert Myers; derocco_16v
Cc: s-car-list
Subject: Re: [s-cars] going big

Crickey, belay that.  I went with the Euro A8's @ 314 mm's.  441 615 301A
price was correct though.

----- Original Message -----
From: Robert Myers [bob at chips-ur-s.com]
Sent: 02/24/2009 06:06 PM EST
To: derocco_16v at comcast.net
Cc: Michele Deltergo; s-car-list at audifans.com
Subject: Re: [s-cars] going big

I'm running BIRA.ORG system 3 under my stock 16 inch wheels (RS2ed 
urS6).  Clearance is tight but they don't interfere with 
anything.  From the BIRA site: Uses the Porsche 996 Carrera 4-piston 
monobloc caliper over the European A8 314x30mm rotor.


At 05:45 PM 2/24/2009, derocco_16v at comcast.net wrote:
>I will probably do the same and get the 312mm rotors so I can still
>use my 16" winter setup
>Thanks for all the info!
>Best on-line source for Brembo rotors anyone?
>'87 Scirocco16v
>'95 S6
>----- Original Message -----
>From: "Michele Deltergo" <Michele_Deltergo at KeyBank.com>
>To: s-car-list at audifans.com
>Cc: lee at wheelman.com, "derocco 16v" <derocco_16v at comcast.net>
>Sent: Tuesday, February 24, 2009 9:56:29 AM GMT -05:00 US/Canada 
>Subject: re: going big
>Since Derocco16V said he was going with the Boxster calipers, the
>pad would be the same no matter which rotor he uses.
>I went 312 because while the leverage argument is real, I think the 
>benefit is minuscule and I needed more radial clearance to fit
>under the stock wheels.
>Lee Levitt lee at wheelman.com
>Mon Feb 23 19:08:24 PST 2009
>So what's the difference between the 312 and 323 rotors, aside from 
>slightly more thermal mass? How much larger is the pad surface?
>I suspect that you won't get much difference in braking. You will get 
>heavier rotors and calipers, and you will need to run 18" wheels, 
>If he's not tracking the car, I don't see that the additional weight 
>and expense is worth it.
>Just my .02
>< derocco_16v at comcast.net >
> > To: < s-car-list at audifans.com >
> >> So, I have been planning on upgrading the "fabulous" stock brakes 
> >> on my S6, to some more "meaty" ones out of a boxter.
>Mike Del Tergo CAIA, CFA
>SVP-Senior Portfolio Manager
>Key Private bank
>Investment Management Services
>1 Canal Plaza
>Portland, ME 04101
>207 874 7188
>Email Classification: KeyCorp Internal
>This communication may contain privileged and/or confidential information.
>is intended solely for the use of the addressee. If you are not the
>recipient, you are strictly prohibited from disclosing, copying,
>or using any of this information. If you received this communication in
>please contact the sender immediately and destroy the material in 
>its entirety,
>whether electronic or hard copy. This communication may contain 
>nonpublic personal
>information about consumers subject to the restrictions of the
>Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
>such information for any purpose other than to provide the services for
>you are receiving the information.
>127 Public Square, Cleveland, OH 44114
>If you prefer not to receive future e-mail offers for products or
>services from Key
>send an e-mail to mailto:DNERequests at key.com with 'No Promotional 
>E-mails' in the
>SUBJECT line.
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 8.0.237 / Virus Database: 270.11.3/1969 - Release Date:
>02/24/09 06:43:00
S-CAR-List mailing list
S-CAR-List at audifans.com http://www.audifans.com/mailman/listinfo/s-car-list

More information about the S-CAR-List mailing list