[urq] couple of parts needed:
bob at audisport.com
Mon Dec 13 15:55:24 EST 2004
Ive actually done something similiar to this before and it works
perfectly. I used the GM door motor-solenoids. Built a small circuit,
ran the wires etc and voila! I just didnt want to go through all that
right now for this car... maybe I will though. Never tried the VAG
solenoids though, hmmm..
Buchholz, Steven wrote:
>... I believe my suspicion has been validated, but I can't find a
>reference to it ... so I'll repost as a suspicion ...
>I've always felt the diff lock actuators look an awful lot like the
>pneumatic motors for the door/trunk locks. I don't know if the proper
>solution is to swap the diaphragm from a door lock to a diff lock or if
>you can do a wholesale swap ... the door lock motors live a somewhat
>better life than the diff lock actuators, so a diaphragm from one of
>them should be almost like new ...
>San Jose, CA (USA)
>>THanks to the help of a couple of listers, I think I tracked down my
>>fuel gauge problem, I think its the sending unit. Anyone know of the
>>best place to get one? probably new is preferred. Also how
>>about rear diff lock diaphragm...need one of those too. I think new is
>>ridiculous money so used works for me as long as its in good shape.
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>Have an urq question? Check the Audifans Knowledgebase!
>Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
More information about the urq