[urq] Suspension rebuild continues
Pasqualoni, James E
james.pasqualoni at gs.com
Fri Dec 17 12:00:08 EST 2004
Thanks Brandon. Unfortunately, that's what I thought. May just be time to
blast and powder coat the originals...
From: Brandon Rogers [mailto:brogers at terrix.com]
Sent: Friday, December 17, 2004 11:48 AM
To: Pasqualoni, James E; urq at audifans.com
Subject: Re: [urq] Suspension rebuild continues
My understanding is that more than likely they'll rub if you don't have
rolled rear fenders.
----- Original Message -----
From: "Pasqualoni, James E" <james.pasqualoni at gs.com>
To: "'Brandon Rogers'" <brogers at terrix.com>; <urq at audifans.com>
Sent: Friday, December 17, 2004 9:38 AM
Subject: RE: [urq] Suspension rebuild continues
> Thanks Brandon. I was considering the 84-85 springs, but I am
> concerned about clearance, as I'm running 8 in R-8's, and my fenders
> aren't rolled. Any advice on this fitment?
> -----Original Message-----
> From: Brandon Rogers [mailto:brogers at terrix.com]
> Sent: Friday, December 17, 2004 11:36 AM
> To: Pasqualoni, James E; urq at audifans.com
> Subject: Re: [urq] Suspension rebuild continues
> Good call on the Bilsteins - great performance - and most on this List
> them will agree. As for the springs, no advice except maybe a
> if you can't find '83 springs how about '84 or '85 - they lower the
> car about an inch and are still factory spec....
> '84 ur
> ----- Original Message -----
> From: "Pasqualoni, James E" <james.pasqualoni at gs.com>
> To: <urq at audifans.com>
> Sent: Friday, December 17, 2004 8:59 AM
> Subject: [urq] Suspension rebuild continues
> > Good Morning All,
> > The rebuild of the oe 83 rear suspension is coming along. The
> > current
> > is to replace oe-spec springs and use Bilstein HD's. I am looking
> > to see
> > anyone has had any luck sourcing new oe-spec coil springs for a 83?
> > I
> > in the archives that at least one lister is using springs from
> > Suspension Techniques, but I can't find a listing for a part/product
> > number.
> > Any recent BTDT?
> > TIA (once again),
> > Jim
> > _______________________________________________
> > Audifans urq mailing list
> > Send posts to: mailto:urq at audifans.com
> > Manage your list connection:
> > http://www.audifans.com/mailman/listinfo/urq
> > Have an urq question? Check the Audifans Knowledgebase!
> > http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> > Have an urq answer? ... Please help others by adding to the KB ...
> > all
> contributions welcome!
More information about the urq