[urq] relayed starter

daniel darlington lanky_d at yahoo.com
Mon Jun 28 10:30:44 EDT 2004

I've located my relay on the firewall just to the
right of the coil.  the wiring was the most fun.  i
have it going all the way around the fuel distributor
and intake igloo and then down behind the heeadlight. 
it goes then to a piece of shiny heatshield stuff (i
found on a 4000 at the junkyard) that is zip-tied to
the oil cooler line, then taps into the starter
wiring. i ran two wires down so i didn't have to go
back thru the firewall.  maybe or maybe not a good
idea, but it works.  also while you're under there,
use safety wire to hold a bit of insulation around the
starter to keep it a bit cooler 
--- DGraber460 at aol.com wrote:
> I beleive a few have relayed the starter on their
> cars, which I would like to 
> do on my WX URQ, and have 2 questions.
> Where do you route the wire and locate the relay?
> That turbo and plumbing 
> occupy most of the immediate area and get mighty
> hot.
> Thanks
> Dennis
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans
> Knowledgebase!
> Have an urq answer? ... Please help others by adding
> to the KB ... all contributions welcome!

daniel a. darlington

Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!

More information about the urq mailing list