[urq] Igloo Hose Repost ...

Buchholz, Steven Steven.Buchholz at kla-tencor.com
Thu Nov 4 19:16:05 EST 2004

... my pleasure!  I did add the topic to the urq area of the audifans
knowledgebase too ... 

The diameter change is effected by the metal piece at the lower end of
the hose.  My plan, should I need to do this is to simply use the metal
end of the donor hose, slide Aircraft Spruce stuff over it and add a
hose clamp at the bottom to keep it in place ... perhaps with a bit of
non-setting Hylomar sealant if I'm feeling paranoid ... 

I took measurements of the IDs, but for some reason the info isn't in my
"notes" folder.  I've got my old hose sitting free in the garage, so it
is pretty easy to take pix or measurements ... let me know if you need
anything along those lines ...

Steve B
San Jose, CA (USA)
> Thank you for the re-post Steve! I found the material with 
> the P/N on the Aircraft Spruce site. I'm wondering, though, 
> how best to deal with the different size fittings top and 
> bottom. 

More information about the urq mailing list