[urq] Boost gauge

Louis-Alain_Richard at computerhorizons.com Louis-Alain_Richard at computerhorizons.com
Mon Oct 18 16:38:34 EDT 2004

I guess somebody got "creative" and plumbed your gauge into the vaccum 
reserve at rest...
Try to "empty" the reserves by actuating the AC recirculation flap and/or 
the diff lock actuators. Then your display should be ok.


"Brandon Rogers" <brogers at terrix.com> 
Sent by: urq-bounces at audifans.com
2004-10-18 16:13
Please respond to
Brandon Rogers <brogers at terrix.com>

"Urq List" <urq at audifans.com>

[urq] Boost gauge

Hey guys-
WRT the in-dash boost gauge -  where 0 is at the bottom and "1" is midway 
and it goes to "2".  I've always been under the impression these were 
tsuppose dto sit at "1" when off (horizontal needle) and show boost and 
vacuum.  Mine sits at "0", so the needle is pointing down and hence will 
not show vacuum.  I figured somebody had "corrected" this for me in the 
apst, but in looking at it last night (out of car) I just don't see how it 
can be messed with.

Anybody know how to alter their initial reading?  Anybody else's gauge sit 
at "0" when car is off? 



More information about the urq mailing list