[urq] Dialynx manifold

Justin cbrooks2 at san.rr.com
Sat Aug 13 12:45:44 EDT 2005

The big question though: Did you notice any performance gains?
Justin C.
----- Original Message -----
From: "Gary Brown" <gmbchef at sbcglobal.net>
To: <urq at audifans.com>
Cc: <stevenmurray at lycos.com>
Sent: Friday, August 12, 2005 10:38 PM
Subject: [urq] Dialynx manifold

> Steven, I have a Dialynx EM on my urq.
> When I  bought the car it was very noisy and the manifold was warped like
> hell.
>  When I did my first head-off work, I had it machined flat. The machinist
> said that after a manifold warps, and it is repairable, that it should not
> warp again, unless it gets over heated.
>   So far it's been 5 years, and honestly, the #1 cylinder exhaust nut
> out every so often and I get a slight tick when cold. I got tired of
> tightening it and finally put a second nut on it and been ok ever since.
>  Myself, I would look into getting one, as we know more and more parts are
> becoming NLA. It's always good to have something on the back burner.
> Gary.
> -
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!

More information about the urq mailing list