[urq] Sport Quattro Brakes

djdawson2 at aol.com djdawson2 at aol.com
Mon Jun 27 18:18:53 EDT 2005

 Yep... hub centric is the issue, and I solved that by machining 4mm off the "wheel face" of the rotor.  It works great, but takes a bit of effort.
-----Original Message-----
From: Martin Pajak <martin at quattro.ca>
To: Jack Walker <JackW at ihco.com>; urq at audifans.com
Sent: Mon, 27 Jun 2005 17:48:23 -0400
Subject: RE: [urq] Sport Quattro Brakes


Here is my experience with the SQ brakes;

You can run the SQ rotors as well, however they will not be hubcentric and
you will need longer bolts (or studs in my case).
Final version is SQ calipers and S4TT rotors machined down to 300mm.  I
found these rotors to have much more "meat" on them.

Hope this helps.
Martin Pajak

More information about the urq mailing list