[urq] Family album

SpotatAshleys spotatashleys at hotmail.com
Fri Mar 18 14:56:03 EST 2005

In my experience the rear nozzle is unlikely to be re-useable after removal.
It has lugs that open out when pressed in to the hole and prevent it being
pulled out again. Order a new one first if I were you.
Re: the tail lights. These are sealed in with a mastic-like gunk which does
not set hard but takes slow constant pulling pressure with sore fingertips
to remove (after having removed the nuts inside of course). A heat gun
sounds a good ised. It will soften the sealer.


'87 WR

----- Original Message -----
From: <gmbchef at comcast.net>
To: <urq at audifans.com>
Sent: Friday, March 18, 2005 7:03 PM
Subject: [urq] Family album

> Would someone kindly send me the exploded view of the rear window washer
nozzle? I need to remove it before bead blasting the car.
> Also, after removing the fasteners from the tail lights they won't come
out easily.  Whats the trick? Heat gun?
>  TIA
> Gary
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!

More information about the urq mailing list