[urq] Brake Master Cylinder P/N 443~447 611 021
urq at moregraphics.nl
Fri May 20 15:24:21 EDT 2005
But what about the "old" cap for the reservoir with fluid level sensor (443
611 349)? Does it fit that 200 reservoir (443 611 301 B).
If it doesn't, and the 200 cap (443 611 349 A) is mandatory, how to fix the
difference in terminal pin housing and rubber protective cap, i.e. they look
very different to me in ETKA. Just cut the old wire terminals off and crimp
on new headers/terminal which matches the new terminal pin housing?
Q1. Do you exactly know the difference between the URQs and 200s reservoir,
the P/N difference is only the "B".
Q2. Do you exactly know the difference between the URQs and 200s cap and
level sensor, the P/N difference is only "A" (the terminal?)
...unless you mean you will have to swap the early model VIN >> C reservoir
(431 611 301 A) and matching cap (431 611 351 A)
1986 GV (Swiss WR)
1985 CGT KV
1982 GL DD
----- Original Message -----
From: "Pasqualoni, James E" <james.pasqualoni at gs.com>
To: "'Brandon Rogers'" <brogers at terrix.com>; "Urq List" <urq at audifans.com>
Sent: Friday, May 20, 2005 6:25 PM
Subject: RE: [urq] Brake Master Cylinder P/N 443~447 611 021
Straight swap, you'll just need to use the reservoir from the 200.
More information about the urq