[urq] Hi Pressure PS hose
saltinot at earthlink.net
Mon Nov 14 16:48:47 EST 2005
I removed mine last week with an impact, a swivel, and a 24mm socket. It
was pretty tight. I ran the air line through the left wheel well where the
tie rod runs.
BTW, my rubber bushings were trashed too!
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of Brandon Rogers
Sent: Monday, November 14, 2005 3:04 PM
To: Urq List
Subject: [urq] Hi Pressure PS hose
I'm trying to replace the high pressure hose (from Pump to Bomb) and am
struggling with the 24mm banjo bolt on the Bomb side.
The bomb moves around quite a bit on the rubber cushions- I've stuck a few
big thick washers in between the two plates to keep it from squishing down,
and I've tried using a really big pair channel locks to keep the other side
from rising - to no avail. Ben suggested I remove the bomb for more access
- I will try this - any other ideas? Air tools? - have yet to try an impact
wrench but with the tie rod it may be too tight anyway...
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question? Check the Audifans Knowledgebase!
Have an urq answer? ... Please help others by adding to the KB ... all
More information about the urq