[urq] Lewis Firewall Brace Install Q's

Martin Pajak Martin at quattro.ca
Fri Oct 21 12:10:25 EDT 2005


Here is a helpful link:

BTW for guys with ABS (euro cars etc), this brace is a very tight fit because of the ABS unit and related wiring.. however it fits and works great!!

Martin Pajak


1982 Audi Ur-quattro (50,000 mi) new project
1985 Audi Ur-quattro (203,000 km) With Lewis Firewall brace  
1987 Audi 4000s quattro (195,000 km) With Lewis Firewall brace

---------- Original Message ----------------------------------
From: "Pasqualoni, James E" <james.pasqualoni at gs.com>
Date:  Fri, 21 Oct 2005 09:44:03 -0400

>I am going to tackle the clutch slave and master cylinders along with the
>master to slave hose and the Lewis firewall brace.  Any BTDT on the firewall
>brace install?  I haven't been up in there to look at how to orient the
>brace, and I'm sure it is self-evident and mounts to existing points.
>However, any BTDT or other wisdom herein imparted would be most appreciated.
>TIA (once again),
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>Have an urq question?  Check the Audifans Knowledgebase!
>Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!

More information about the urq mailing list