[urq] turbo torque settings

SpotatAshleys spotatashleys at hotmail.com
Mon Jan 16 13:40:30 EST 2006

Many thanks Brandon
Yes it is the hex heads that allow the housings to rotate. If I don't get
any figures I'll just do as you suggest. Nip them up tight.
Thanks again

----- Original Message -----
From: "Brandon Rogers" <brogers at terrix.com>
To: "SpotatAshleys" <spotatashleys at hotmail.com>; <urq at audifans.com>
Sent: Monday, January 16, 2006 4:50 PM
Subject: Re: [urq] turbo torque settings

> Keith-
> are referring to the 10mm hex bolts that, when loosened, allow the
> to rotate on the center piece?
> If so I've never seen the torques spec and in th epast have just made them
> pretty tight.  Due to the contorted access whnt eh turbo is in situ,
> couldn't get a torque wrench on it even if I wnated to.
> If you're talking about the nuts that hold the turbo to the EM or turbo to
> the DP, I make them as tight as I can.
> hth a little
> Brandon
> ----- Original Message -----
> From: "SpotatAshleys" <spotatashleys at hotmail.com>
> To: <urq at audifans.com>
> Sent: Saturday, January 14, 2006 10:15 AM
> Subject: [urq] turbo torque settings
> Can anyone supply me with the torque settings for the two turbine housings
> (I & E) on a KKK K26 turbo please? Have searched the net to no avail. Many
> thanks.
> Keith
> '87 WR
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!

More information about the urq mailing list