[urq] Sunroof not sealing
brogers at terrix.com
Wed May 3 17:17:23 EDT 2006
What do you think about graphite powder on the cable/spring - should allow
easier sliding yet not be wet and attract dirt....
> further that comes to mind I'll post that up ...
> Personally, I'd refrain from lubricating the drive cables in any way ...
> Steve B
> San Jose, CA (USA)
>> Recently my sunroof seems to not be sealing well - more wind noise on
>> highway. The felt seal is in good shape - its only a few years old.
>> So I've popped the sunroof off - first time ever since owning the car
> (8 yrs
>> now) and last night spent some time trying to just clean off any
> tracks and
>> pivot points in the pop-up mechanism. I also took off the cable drive
>> cleaned it off.
>> Coinciding with the wind noise - the crank feels different - as in it
>> get to its end detente but the roof could still be pushed down
> slightly from
>> outside/above. I think the cable drive had skipped on the cable and
> was not
>> pulling the roof down completely as all the parts seem to be fine.
> And the
>> height adjustment screws for the back of the sunroof were maxed out to
>> the roof down. Any pointers on any not so obvious places to clean,
> things to
>> avoid, etc? Any recommendation on lube? And is there a [easy] way to
>> friction of the cable through the guide?
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question? Check the Audifans Knowledgebase!
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
More information about the urq