[urq] Brake Servo Pushrod Seal - Source?

Renneisen, Eric 475 Eric.Renneisen at CIGNA.com
Mon Nov 6 13:20:29 EST 2006

Alan wrote:
> The O rings are on the way to rebuilt the servo and 
> hopefully this will be sufficient to stop the AFT 
> leak.  However if the seal needs to be replaced, can 
> anyone provide contact information for a supplier.  
> John at Sport Wheels (as reported by others) is no 
> longer putting repair kits together due to "lack of 
> demand".

When I got my kit from John, the pushrod seal was still in the
manufacturer's box.  I've still got that at home and I'll be happy to
forward on the name and specs.  Do you have the list of specs for all
the o-rings?  Since John's no longer supplying these, it'd be nice to
gather the info together so folks can build their own kit.

Eric R.
'93 S4
'86 urq

CONFIDENTIALITY NOTICE: If you have received this email in error, please immediately notify the sender by e-mail at the address shown.  This email transmission may contain confidential information.  This information is intended only for the use of the individual(s) or entity to whom it is intended even if addressed incorrectly.  Please delete it from your files if you are not the intended recipient.  Thank you for your compliance.  Copyright 2006 CIGNA

More information about the urq mailing list