[urq] ENGINE BUILD CHECKLIST
benswann at comcast.net
Wed Sep 20 02:34:07 EDT 2006
I figured someone would have one. I could do one myself, but hate to
re-invent the wheel, but always can improve upon it. EXCEL spreadsheet would
I have a computer in the garage networked to main server in house, but as you
say - a hand checkoff, between tasks/or beers(separate row with tally check to
indicate job complexity in beers consumed) ;-] Besides - too much grease on
But seriously - I have at least three engines being assembled and installed.
This would help keep track of what has been done.
From: Huw Powell [mailto:audi at humanspeakers.com]
Sent: Wednesday, September 20, 2006 1:55 AM
To: Ben Swann
Cc: 'list submissions'; urq at audifans.com; s-car-list-request at audifans.com
Subject: Re: ENGINE BUILD CHECKLIST
> I'm in process of building up a few motors. Does anyone have a checklist
> compiled to keep track of things done for an engine build. Would be good if
> particularlyfor VAG/I4 and I5 engines, but a generic list or spreadsheet
would be good too.
> Mainly need as a sanity check - for ex. I can check if the rear main seal
was replaced or not, crank turned, rod bearings, cyl. Honed, rings, etc.
Not meaning to sound sarcastic, I do see where you are coming from... I
could say, tell me everything on the "list"... I'll put that in column one.
Column 2,3,4 would read, "needs?" "done" "installed"
or something like that.
I wouldn't keep track in the computer, for this, I'd print the sheet out
and fill in the blanks on paper attached to each pile'o'parts.
Because keeping track in one's brain leaves precious little room for
More information about the urq