[urq] Megaquirt V2.2 5 cyl configuration
ingo.rautenberg at gmail.com
Wed Apr 25 10:39:59 EDT 2007
Have you checked on Motorgeek.com? There's a bunch of 034efi and a
few Megasquirt guys there as well.
On Apr 25, 2007, at 10:11 AM, Ben Swann wrote:
> I'm getting ready to fire my new engine up - using Megasquirt V.22
> and MAC-14
> for ignition (should be same config. As MAC-11).
> Does anyone have some basic configuration files or screens I can
> compare with
> mine. I'm using Megatune 2.25 (trying to use MSquirt and Spark
> Extra for
> MAPdot code, but won't communicate with the V2.2 unit - I suspect
> the 9V
> battery used for the Stimulator is too low.) Megatune works fine
> to get my
> initial setup correct.
> I was looking for some samples on line, but not finding much.
> Mainly I need
> to verify injections per. Engine cycle - is it 1 or 5? It is a
> single window
> hall sensor, but pulse being generated by the ECU and should be 5
> pulses - 1
> per cyl.
> I'm using 37 lb injector, high impedance. Engine is MC-1 with NF
> big valve
> head.Fuel Pressure set at 45PSI.
> TIA for quick replies.
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/
> Have an urq question? Check the Audifans Knowledgebase!
> Have an urq answer? ... Please help others by adding to the KB ...
> all contributions welcome!
More information about the urq