[urq] Megaquirt V2.2 5 cyl configuration
urq at pacbell.net
Wed Apr 25 14:56:45 EDT 2007
... since you didn't list the groups you're polling ... have you tried
posting to the "MegaVAG" group on Yahoo?
Here's the footer on a post for info on subbing:
Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> To change settings online go to:
(Yahoo! ID required)
San Jose, CA (USA)
----- Original Message -----
From: "Ben Swann" <benswann at comcast.net>
To: "'Ingo Rautenberg'" <ingo.rautenberg at gmail.com>
Cc: <cody at 5000tq.com>; <urq at audifans.com>; <quattro at audifans.com>;
<QSHIPQ at aol.com>
Sent: Wednesday, April 25, 2007 8:54 AM
Subject: Re: [urq] Megaquirt V2.2 5 cyl configuration
>I have been looking through the various boards, Motorgeek, etc. but have
> found these. I thought I saw them awhile back, but not finding any.
> not looking in the right place.
> -----Original Message-----
> From: Ingo Rautenberg [mailto:ingo.rautenberg at gmail.com]
> Sent: Wednesday, April 25, 2007 10:40 AM
> To: Ben Swann
> Cc: quattro at audifans.com; urq at audifans.com; cody at 5000tq.com
> Subject: Re: [urq] Megaquirt V2.2 5 cyl configuration
> Have you checked on Motorgeek.com? There's a bunch of 034efi and a
> few Megasquirt guys there as well.
> On Apr 25, 2007, at 10:11 AM, Ben Swann wrote:
>> I'm getting ready to fire my new engine up - using Megasquirt V.22
>> and MAC-14
>> for ignition (should be same config. As MAC-11).
>> Does anyone have some basic configuration files or screens I can
>> compare with
>> mine. I'm using Megatune 2.25 (trying to use MSquirt and Spark
>> Extra for
>> MAPdot code, but won't communicate with the V2.2 unit - I suspect
>> the 9V
>> battery used for the Stimulator is too low.) Megatune works fine
>> to get my
>> initial setup correct.
>> I was looking for some samples on line, but not finding much.
>> Mainly I need
>> to verify injections per. Engine cycle - is it 1 or 5? It is a
>> single window
>> hall sensor, but pulse being generated by the ECU and should be 5
>> pulses - 1
>> per cyl.
>> I'm using 37 lb injector, high impedance. Engine is MC-1 with NF
>> big valve
>> head.Fuel Pressure set at 45PSI.
>> TIA for quick replies.
>> Audifans urq mailing list
>> Send posts to: mailto:urq at audifans.com
>> Manage your list connection: http://www.audifans.com/mailman/
>> Have an urq question? Check the Audifans Knowledgebase!
>> Have an urq answer? ... Please help others by adding to the KB ...
>> all contributions welcome!
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question? Check the Audifans Knowledgebase!
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
More information about the urq